taelo_bg

lihlahisoa

XCKU15P-2FFVE1517I Kintex UltraScale+FPGAs DC le AC Switching

tlhaloso e khuts'oane:

XCKU15P-2FFVE1517I Kintex UltraScale+FPGAs DC le AC Switching li fumaneha ka limaraka tsa -3, -2, -1 tsa lebelo, ka lisebelisoa tsa -3E tse nang le
tshebetso e phahameng ka ho fetisisa.Lisebelisoa tsa -2LE le -1LI li ka sebetsa ka motlakase oa VCCINT ho 0.85V kapa 0.72V le ho fana ka
matla a tlase a maemo a tlase.Ha e sebelisoa ho VCCINT = 0.85V, ho sebelisa lisebelisoa tsa -2LE le -1LI, lebelo
litlhaloso tsa lisebelisoa tsa L li tšoana le limaraka tsa lebelo la -2I kapa -1I.Ha e sebetsoa VCCINT = 0.72V, the
-2LE le -1LI tshebetso le matla a tsitsitseng le a matla a fokotsehile


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Litšobotsi tsa Sehlahisoa

Nomoro ea Li-Logic Blocks: 1143450

Nomoro ea Li-Logic Blocks: 1143450

Nomoro ea li-Macrocell: 1143450Macrocells

Nomoro ea li-Macrocell: 1143450Macrocells

Lelapa la FPGA: Kintex UltraScale+

Lelapa la FPGA: Kintex UltraScale+

Setaele sa Taba ea Logic: FCBGA

Setaele sa Taba ea Logic: FCBGA

Nomoro ea Lithakhisa: 1517Pins

Nomoro ea Lithakhisa: 1517Pins

Nomoro ea Mephato ea Lebelo: 2

Nomoro ea Mephato ea Lebelo: 2

Kakaretso ea Bits ea RAM: 34600Kbit

Kakaretso ea Bits ea RAM: 34600Kbit

Nomoro ea I/O's: 512I/O's

Nomoro ea I/O's: 512I/O's

Tsamaiso ea Oache: MMCM, PLL

Tsamaiso ea Oache: MMCM, PLL

Motlakase oa Motlakase oa Matla: 825mV

Motlakase oa Motlakase oa Matla: 825mV

Matla a Phepelo a Matla: 876mV

Matla a Phepelo a Matla: 876mV

I/O Supply Voltage: 3.3V

I/O Supply Voltage: 3.3V

Maqhubu a Matla a ho sebetsa: 775MHz

Maqhubu a Matla a ho sebetsa: 775MHz

Mefuta ea lihlahisoa: Kintex UltraScale+ XCKU15P

Mefuta ea lihlahisoa: Kintex UltraScale+ XCKU15P

Hangata ka moelelo o holimo oa kutloisiso,Phepelo ea motlakase ea ACmotlakase o kenang ke AC.Dc Motlakase oa motlakase oa phepelo ea motlakase ke DC.Matla a AC a boetse a lekana le AC/DC, matla a DC a lekana le DC/DC, empa ka linako tse ling DC/AC e boetse e bitsoa matla a DC.Dc e fetola phepelo ea motlakaseka kakaretso e amana le AC mme a re, ho fetola phepelo ea motlakase ke mokhoa oa ho fetoha ho tloha ho AC ho ea ho DC, ke ho re, phepelo ea motlakase ha e le hantle ke motlakase oa AC ho ea ho DC.Ka hona, ka mokhoa o sebetsang, phepelo ea motlakase ea AC ke polelo e akaretsang, 'me ha ho na molao-motheo oa nnete.

Phapang pakeng tsa phepelo ea motlakase ea DC le phepelo ea motlakase ea AC

Tlhaloso ea phepelo ea motlakase ea Dc

Motlakase oa motlakase oa Dc o sebelisetsoa ho laola tube ea ho fetola ka potoloho bakeng sa ho bulela le ho khaola ka lebelo le phahameng, 'me motlakase o tobileng o fetoloa ho ba maqhubu a phahameng a ho fetola motlakase ho fana ka transformer bakeng sa transformer, kahoo e hlahisa sehlopha se hlokahalang kapa lihlopha tse eketsehileng tsa motlakase!E arotsoe ho latela li-converter tsa DC / DC, 'me likarolo tsa li-converter tsa DC / DC li batla li tšoana.

Motlakase o fetolang motlakase oa Dc o entsoe ka filthara ea ho kenya, rectifier le filthara, inverter, rectifier le filthara.

Litšobotsi tsa phepelo ea motlakase ea DC

1. Fokotsa porosity

2, ntlafatsa matla a tlamang

3, ntlafatsa bokhoni ba tšireletso le bokhoni ba ho hasana, boloka lisebelisoa tse tala

4, fokotsa khatello ea ka hare ea ho roala, fokotsa li-additives

5, e thusa ho fumana sebopeho se tsitsitseng sa ho roala alloy.

6, ntlafatsa ho qhibiliha ha anode, ha ho hlokahale hore ho be le activator ea anode.

7, ntlafatsa thepa ea mochini le ea 'mele ea ho roala

 

Molao-motheo oa ts'ebetso oa phepelo ea motlakase oa DC o tjena:

1. Motlakase oa motlakase oa AC oa lokisoa le ho tlhotloa ho DC;

2. Ka PWM e phahameng-frequency (pulse width modulation) signal control switch tube, DC e kenngoa ho switching transformer primary;

3. Switching transformer secondary induction of high frequency voltage, by rectifier filter supply load;

4. Karolo e hlahisoang e khutlisetsoa ho potoloho ea taolo ka potoloho e itseng ho laola potoloho ea mosebetsi oa PWM 'me qetellong e fihlele tlhahiso e tsitsitseng;

Ha e kenngoa, e tlameha ho feta ka har'a likarolo tse kang khoele ea hona joale ho sefa tšitiso ho marang-rang a matla, hape e sefa tšitiso ea phepelo ea matla ho marang-rang a matla.Tabeng ea matla a ts'oanang, ha ho na le maqhubu a phahameng a ho fetoha, ho na le palo e nyenyane ea sebopeho sa mochine oa ho fetola, o tla ba le litlhoko tse phahameng bakeng sa tube ea ho fetola;Karolo ea bobeli ea phetoho ea phetoho e ka ba le moea o le mong kapa ho feta, 'me ho na le lipompo tse ngata ka nako e le' ngoe, 'me qetellong ho ka fumanoa tlhahiso e hlokahalang;Moqaping oa phepelo ea motlakase, ts'ireletso e 'ngoe e tlameha ho eketsoa, ​​joalo ka ts'ireletso ea boima bo feteletseng le ts'ireletso ea potoloho e khuts'oane, ho thibela tšenyo ea phepelo ea motlakase.

 

Tšebeliso ea phepelo ea motlakase ea DC

Dc switching power supply e ka khona ho fetolela motlakase oa AC ho motlakase o hlokahalang oa DC le tlhahiso ea hona joale, 'me e sebelisitsoe haholo lisebelisoa tsa sejoale-joale tsa elektroniki.Hajoale, lisebelisoa tse fapaneng tsa elektroniki tse 'marakeng li hlophisitsoe ka mefuta e fapaneng ea lisebelisoa tsa motlakase tse fetohang tsa DC, joalo kalik'homphieutha, liselefouno, mabone a LED, li-charger joalo-joalo.Lefapheng la theknoloji e phahameng, e boetse e phetha karolo ea bohlokoa, joalo ka mekhoa ea puisano, lisebelisoa tsa bongaka,sefofane'me masimo a mang a hloka ho sebelisa lisebelisoa tsa motlakase tsa DC.Dc switching power supply e sebelisoa haholo lisebelisoa tsa indasteri, 'me hona joale mofuta ona oa sehlahisoa o boetse o sebelisoa haholo indastering e fapaneng.E boetse e sebelisoa hangata lisebelisoa tsa motlakase tsa malapeng

 


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona