taelo_bg

lihlahisoa

MSP430G2553IPW20R tšehetsa mofani oa BOM IC MCU 16BIT 16KB FLASH 20TSSOP Electronic Component Integrated Chips

tlhaloso e khuts'oane:

Lelapa la Texas Instruments MSP430 la li-microcontroller tsa matla a tlase haholo le na le lisebelisoa tse 'maloa tse nang le lihlopha tse fapaneng tsa lisebelisoa tse lebisitsoeng lits'ebetsong tse fapaneng.Meaho, e kopantsoeng le mekhoa e mehlano ea matla a tlase, e ntlafalitsoe ho fihlela bophelo bo atolositsoeng ba betri lits'ebetsong tse nkehang tsa litekanyo.Sesebelisoa se na le 16-bit RISC CPU e matla, lirekoto tsa 16-bit, le lijenereithara tse lulang li kenya letsoho ho sebetsa hantle haholo.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Oscillator e laoloang ka dijithale (DCO) e lumella ho tsoha ho tloha mekhoeng ea matla a tlase ho ea ho mokhoa o sebetsang ka tlase ho 1 µs.Letoto la MSP430G2x13 le MSP430G2x53 ke li-microcontroller tse nang le matla a tlase-tlase tse nang le li-timers tse hahelletsoeng ka har'a 16-bit, ho fihla ho 24 I/O capacitive-touch pins, e bapisoang le mefuta e fapaneng ea analog, le bokhoni ba puisano bo hahelletsoeng ka har'a lefatše. sehokelo sa puisano.Ho feta moo litho tsa lelapa la MSP430G2x53 li na le converter ea 10-bit analog-to-digital (A/D).Bakeng sa lintlha tsa tlhophiso bona Letlapa la 1. Lisebelisoa tse tloaelehileng li kenyelletsa lisebelisoa tsa li-sensor tse theko e tlaase tse nkang matšoao a analog, li li fetolela ho litekanyetso tsa digital, ebe li sebetsana le data bakeng sa pontšo kapa bakeng sa ho fetisetsoa ho tsamaiso ea moeti.

Litšobotsi tsa Sehlahisoa

MOFUTA

TLHALOSO

Sehlopha

Lipotoloho tse Kopantsoeng (ICs)

Linear - Amplifiers - Lisebelisoa, OP Amps, Buffer Amps

Mfr

Lisebelisoa tsa Texas

Letoto

-

Sephutheloana

Theipi le Reel (TR)

Seha Tape (CT)

Digi-Reel®

SPQ

70Tu be

Boemo ba Sehlahiswa

E sebetsa

Mofuta oa Amplifier

Sepheo se Akaretsang

Palo ea Lipotoloho

4

Mofuta oa Sephetho

Seporo-ho-Seporo

Sekhahla sa Slew

1V/µs

Fumana Sehlahisoa sa Bandwidth

1 MHz

Hajoale - Leeme la Kenyeletso

15 nA

Voltage - Input Offset

1.7 mV

Hajoale - Phepelo

410µA (x4 Channels)

Hona joale - Output / Channel

40 mA

Voltage - Thepa ea Phano (Mots)

2.7 V

Voltage - Supply Span (Boholo)

5.5 V

Mocheso oa ho sebetsa

-40°C ~ 125°C (TA)

Mofuta oa ho Beha

Thaba e kaholimo

Sephutheloana / Taba

14-SOIC (0.154", 3.90mm Bophara)

Sephutheloana sa Sesebelisoa sa Bafani

14-SOIC

Nomoro ea Sehlahisoa sa Motheo

LMV324

Tlhaloso

Microcontroller Unit (MCU), e tsejoang hape ka hore ke Single-Chip Microcomputer (MCU) kapa komporo ea monolithic, ke frequency ea Central Process Unit (CPU) le lintlha tsa ho etsa phokotso e nepahetseng, le memori (memory), counter (E boetse e kopanya likhokahano tsa peripheral. joalo ka memori, USB, converter ea A/D, UART, PLC, DMA esita le LCD driver circuitry ka chip e le 'ngoe ho etsa komporo ea boemo ba chip e ka laoloang ka mefuta e fapaneng ea lits'ebetso tse fapaneng. , lisebelisoa tsa PC, li-remote control, lisebelisoa tsa elektroniki tsa likoloi, li-motors tsa liindasteri, le li-robot arm controls.

Classification Kopo

1. Sepheo se akaretsang: Lisebelisoa tsohle (ROM, RAM, I / O, EPROM) tse ka ntlafatsoang li fuoa mosebedisi.
2. E inehetse: Thepa ea hardware le litaelo li etselitsoe morero o itseng, mohlala, selaoli sa motsamao oa sehatisi, selaoli sa khatiso, selaoli sa makoloi, jj.

Liphapang tse ka Sehloohong

CPU (Central Processing Unit, Central Processing Unit) e entsoe ka makala a mararo, le leng ke DSP (Digital Signal Processing/Processor, Digital Signal Processing), ha tse ling tse peli ke MCU (Micro Control Unit, Micro Controller Unit) le MPU ( The tse ling tse peli ke MCU (Micro Control Unit) le MPU (Micro Processor Unit).
MCU e na le li-peripheral tsa on-chip tse kopantsoeng;MPU ha e na li-peripherals (mohlala, li-memory arrays) 'me ke processor e kopantsoeng haholo e nang le sebopeho sa morero o akaretsang, MCU e nang le lisebelisoa tse kopantsoeng li tlosoa;DSP e na le matla a matla a k'homphieutha 'me e ntle mesebetsing e mengata e pheta-phetoang ea data, ha MCU e loketse ho sebetsana le ho hlahloba le ho sebetsa ka mefuta e mengata ea boitsebiso bo tsoang mehloling e fapaneng ea tlhahisoleseding, e lebisang tlhokomelo ho laola,' me ha e potlake joaloka DSP.Motsoako oa DSP le MCU ke DSC, eo qetellong e tla nka sebaka sa lichifi ka bobeli.

Mabapi le Sehlahisoa

Lelapa la Texas Instruments MSP430 la li-microcontroller tsa matla a tlase haholo le na le lisebelisoa tse 'maloa tse nang le lihlopha tse fapaneng tsa lisebelisoa tse lebisitsoeng lits'ebetsong tse fapaneng.Meaho, e kopantsoeng le mekhoa e mehlano ea matla a tlase, e ntlafalitsoe ho fihlela bophelo bo atolositsoeng ba betri lits'ebetsong tse nkehang tsa litekanyo.Sesebelisoa se na le 16-bit RISC CPU e matla, lirekoto tsa 16-bit, le lijenereithara tse lulang li kenya letsoho ho sebetsa hantle haholo.Oscillator e laoloang ka dijithale (DCO) e lumella ho tsoha ho tloha mekhoeng ea matla a tlase ho ea ho mokhoa o sebetsang ka tlase ho 1 µs.
Letoto la MSP430G2x13 le MSP430G2x53 ke li-microcontroller tse nang le matla a tlase-tlase tse nang le li-timers tse hahelletsoeng ka har'a 16-bit, ho fihla ho 24 I/O capacitive-touch pins, e bapisoang le mefuta e mengata ea analog, le bokhoni ba puisano bo hahelletsoeng ka har'a lefatše. sehokelo sa puisano.Ho feta moo litho tsa lelapa la MSP430G2x53 li na le converter ea 10-bit analog-to-digital (A/D).Bakeng sa lintlha tsa tlhophiso bona.
Lisebelisoa tse tloaelehileng li kenyelletsa lisebelisoa tsa li-sensor tse theko e tlaase tse nkang matšoao a analog, li li fetolela ho boleng ba dijithale, ebe li sebetsana le data bakeng sa ho bonts'a kapa ho fetisetsoa ho sistimi e amohelang.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona