taelo_bg

lihlahisoa

MSP430FR2433IRGER Wholesales Brand New Original Integrated Circuit IC Chip MSP430FR2433IRGER IC Chip

tlhaloso e khuts'oane:

MSP430FR2433 microcontroller (MCU) ke karolo ea MSP430™ Value Line sensing portfolio, lelapa la TI la li-MCU tse theko e tlase haholo bakeng sa lits'ebetso tsa kutlo le ho metha.Mehaho, FRAM, le li-peripheral tse kopantsoeng, tse kopantsoeng le mekhoa e mengata ea matla a tlase, li ntlafalitsoe ho fihlela bophelo bo atolositsoeng ba betri lits'ebetsong tsa kutlo tse nkehang le tse tsamaisoang ke betri ka har'a sephutheloana se senyenyane sa VQFN (4 mm × 4 mm).

TI's MSP430 Ultra-low-power FRAM microcontroller sethala se kopanya FRAM e kentsoeng ka mokhoa o ikhethileng le meralo e akaretsang ea matla a tlase, e lumellang baqapi ba sistimi ho eketsa ts'ebetso ha ba ntse ba theola tšebeliso ea matla.Theknoloji ea FRAM e kopanya matla a tlaase a ngola ka potlako, ho feto-fetoha ha maemo, le mamello ea RAM le ho se feto-fetohe ha flash.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Litšobotsi tsa Sehlahisoa

MOFUTA TLHALOSO

KHETHA

Sehlopha Lipotoloho tse Kopantsoeng (ICs)

E kenyelelitsoe

Li-microcontroller

 

 

 

Mfr Lisebelisoa tsa Texas

 

Letoto MSP430™ FRAM

 

Sephutheloana Theipi le Reel (TR)

Seha Tape (CT)

Digi-Reel®

 

 

 

Boemo ba Sehlahiswa E sebetsa

 

Core processor MSP430 CPU16

 

Boholo ba Core 16-Bit

 

Lebelo 16MHz

 

Khokahano I²C, IrDA, SCI, SPI, UART/USART

 

Pheripherals Brown-out Detect/Reset, POR, PWM, WDT

 

Nomoro ea I/O 19

 

Boholo ba Memori ea Lenaneo 15.5KB (15.5K x 8)

 

Mofuta oa Memori ea Lenaneo FRAM

 

EEPROM Boholo -

 

Boholo ba RAM 4K x 8

 

Voltage - Phepelo (Vcc/Vdd) 1.8V ~ 3,6V

 

Bafetoleli ba Lintlha A/D 8x10b

 

Mofuta oa Oscillator Ka hare

 

Mocheso oa ho sebetsa -40°C ~ 85°C (TA)

 

Mofuta oa ho Beha Thaba e kaholimo

 

Sephutheloana / Taba 24-VFQFN Ped e pepesitsoeng

 

Sephutheloana sa Sesebelisoa sa Bafani 24-VQFN (4x4)

 

Nomoro ea Sehlahisoa sa Motheo 430FR2433  
SPQ 3000PCS  

 

Kenyelletso ho Microcontroller

Microcontroller e tšoana le boko.Ke IC e le 'ngoe e bonolo (e kopantsoeng potoloho).Micro e bolela e nyane.Balaoli ba lutse holim'a chip e nyane.Nakong ena ea theknoloji, ntho e 'ngoe le e' ngoe e ntse e fokotseha ka boholo ka ts'ebetso e potlakileng.Sena se finyelloa ka Microcontroller.ha se letho haese potoloho feela.Sena se entsoe e le compact kamoo ho ka khonehang.Ena ke karolo eoe sebelisoa litsamaisong tse kentsoeng.Ho theosa le lilemo, ho na le lisebelisoa tse ngata tse qapiloe ho rarolla mefuta e fapaneng ea mathata.

Tlhaloso

Hangata, ke ntho e kenyelletsang processor, memori, input/output (I/O) ho chip e le 'ngoe.Li fumaneha hohle.Re ka e bua joalo ka processor.Lisebelisoa tse fapaneng li na le mefuta e fapaneng ea processor eo e seng letho haese microcontroller.

Ex.Ka har'a komporo ea rona, re na le processor e le 'ngoe.Ke karolo efe ea mantlha ea sistimi e akaretsang?Che ea lik'hamphani tse qapang mefuta ena ea li-processor.Ho na le li-microcontroller tse arohaneng ka 4 bit, 8 bit, 16 bit, 32 bit, 64 bit, joalo-joalo.

Li hlophisitsoe ka tsela eo e etsang mesebetsi ea batho habonolo haholo.E hlophisitsoe hore e sebetse ho latela maemo.ke hore litaelo li ngoletsoe seo.

Ho utloisisa li-Microcontrollers

Li sebelisoa haholo-holo lits'ebetsong tse kentsoeng.Haeba u tseba litsamaiso tse kentsoeng joalo ka mochini o hlatsoang, mohala, PSP, joalo-joalo Tsena ke sistimi e nyane e inehetseng e sa hlokeng komporo e ngata.Mona li na le thuso.

Setšoantšo sa MSP430FR2433

  • Microcontroller e kentsoeng
    • Moralo oa 16-bit oa RISC
    • Oache e tšehetsa maqhubu a fihlang ho 16 MHz
    • Matla a pharalletseng a phepelo ho tloha ho 3.6 V ho ea ho 1.8 V (bonyane ba motlakase oa phepelo bo thibetsoe ke maemo a SVS, bona litlhaloso tsa SVS)
  • Mekhoa e ntlafalitsoeng ea matla a tlase haholo
    • Mokhoa o sebetsang: 126 µA/MHz (e tloaelehileng)
    • Standby: <1 µA ka VLO
    • LPM3.5 k'haonte ea nako ea sebele (RTC) e nang le kristale ea 32768-Hz: 730 nA (e tloaelehileng)
    • Ho koala (LPM4.5): 16 nA (e tloaelehileng)
  • Analoge ea ts'ebetso e phahameng
    • 8-channel 10-bit analog-to-digital converter (ADC)
      • Referense ea ka hare ea 1.5-V
      • Mohlala-'me u tšoare 200 ksps
  • Likhokahano tse ntlafalitsoeng tsa serial
    • Likhokahano tse peli tse ntlafalitsoeng tsa serial communication interface (eUSCI_A) li tšehetsa UART, IrDA, le SPI.
    • EUSCI e le 'ngoe (eUSCI_B) e tšehetsa SPI le I2C
  • Li-peripheral tsa digital tse bohlale
    • Li-timers tse 'ne tsa 16-bit
      • Li-timers tse peli tse nang le lirekoto tse tharo tsa ho hapa/bapisa e 'ngoe le e 'ngoe (Timer_A3)
      • Li-timers tse peli tse nang le lirekoto tse peli tsa ho hapa/bapisa e 'ngoe le e 'ngoe (Timer_A2)
    • RTC e le 'ngoe ea 16-bit counter-feela
    • 16-bit cyclic redundancy check (CRC)
  • RAM ea ferroelectric ea matla a tlase (FRAM)
    • Ho fihla ho 15.5KB ea mohopolo o sa fetoheng
    • Khoutu ea ho lokisa liphoso e hahelletsoeng ka hare (ECC)
    • Tšireletso ea ho ngola e hlophisitsoeng
    • Mehopolo e kopaneng ea lenaneo, li-constants, le polokelo
    • 1015ngola mamello ea potoloho
    • Mahlaseli a hanyetsanang le mahlaseli a kotsi
    • Karolelano e phahameng ea FRAM-to-SRAM, ho fihla ho 4:1
  • Sistimi ea oache (CS)
    • On-chip 32-kHz RC oscillator (REFO)
    • On-chip 16-MHz oscillator e laoloang ka dijithale (DCO) e nang le loop e notletsoeng khafetsa (FLL)
      • ± 1% ho nepahala ka tšupiso ea on-chip mocheso oa kamore
    • On-chip oscillator e tlase haholo ea 10-kHz (VLO)
    • On-chip high-frequency modulation oscillator (MODOSC)
    • Oscillator ea kantle ea 32-kHz ea kristale (LFXT)
    • Lenaneo la MCLK prescalar ea 1 ho isa ho 128
    • SMCLK e nkiloeng ho MCLK e nang le prescalar e hlophisitsoeng ea 1, 2, 4, kapa 8
  • Kenyelletso/sephetho le phini ka kakaretso
    • Kakaretso ea 19 I/Os ka VQFN-24 sephutheloana
    • Lithakhisa tse 16 tse sitisang (P1 le P2) li ka tsosa MCU mekhoeng ea matla a tlase
  • Lisebelisoa tsa ntlafatso le software
  • Setho sa lelapa (bona hape Papiso ea Sesebelisoa)
    • MSP430FR2433: 15KB ea lenaneo FRAM, 512B ea tlhahisoleseding FRAM, 4KB ea RAM
  • Likhetho tsa sephutheloana
    • 24 pin: VQFN (RGE)
    • 24-pin: DSBGA (YQW)

Tlhaloso ea MSP430FR2433

MSP430FR2433 microcontroller (MCU) ke karolo ea MSP430™ Value Line sensing portfolio, lelapa la TI la li-MCU tse theko e tlase haholo bakeng sa lits'ebetso tsa kutlo le ho metha.Mehaho, FRAM, le li-peripheral tse kopantsoeng, tse kopantsoeng le mekhoa e mengata ea matla a tlase, li ntlafalitsoe ho fihlela bophelo bo atolositsoeng ba betri lits'ebetsong tsa kutlo tse nkehang le tse tsamaisoang ke betri ka har'a sephutheloana se senyenyane sa VQFN (4 mm × 4 mm).

TI's MSP430 Ultra-low-power FRAM microcontroller sethala se kopanya FRAM e kentsoeng ka mokhoa o ikhethileng le meralo e akaretsang ea matla a tlase, e lumellang baqapi ba sistimi ho eketsa ts'ebetso ha ba ntse ba theola tšebeliso ea matla.Theknoloji ea FRAM e kopanya matla a tlaase a ngola ka potlako, ho feto-fetoha ha maemo, le mamello ea RAM le ho se feto-fetohe ha flash.

MSP430FR2433 MCU e tšehetsoa ke hardware e pharaletseng le ecosystem ea software e nang le meralo ea litšupiso le mehlala ea khoutu ho etsa hore moralo oa hau o qale kapele.Lisebelisoa tsa ntlafatso li kenyelletsaMSP EXP430FR2433LaunchPad™ lisebelisoa tsa nts'etsopele le lisebelisoaSetšoantšo sa TS430RGE24ABoto ea ntlafatso ea sepheo sa 24-pin.TI e boetse e fana ka mahalaMSP430Ware™ software, e fumanehang e le karolo eaCode Composer Studio™ IDEdesktop le liphetolelo tsa leru ka hareTI Resource Explorer.Li-MCU tsa MSP430 li boetse li tšehetsoa ke litšebeletso tse ngata tsa marang-rang, koetliso le tšehetso ea marang-rang kaLiforamo tsa tšehetso tsa E2E™.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona